Scientific Atlanta DPR300 Series - Manual (Page 9)

WebSTAR DPR300 Series Cable Modem Gateway User’s Guide
8
Back Panel Description
The following illustration describes the back panel components of the cable modem gateway.
T10389
POWER 12VDC
HPNA
CABLE
USB
ETHERNET
RESET
1234
1
2
4
3
5
6
1. CABLE – F-Connector connects to an active cable signal from
your cable service provider
2. USB – USB port connects to the USB port on additional
networked device
3. ETHERNET – RJ-45 Ethernet port connects to the Ethernet
ports on additional networked devices
4. RESET – Reset-to-Default button (Factory Reset)
This button is for maintenance purposes only. Do not use
unless instructed to do so by your cable service provider
5. HPNA – Connects the cable modem gateway to your home
telephone wiring
6. POWER - Connects the cable modem gateway to the DC
output of the AC power adapter that is provided with your cable
modem gateway
Only use the power cord and the AC power adapter that
are provided with your cable modem gateway.