Scientific Atlanta DPR300 Series - Manual (Page 52)

How Do I Configure the Cable Modem Gateway?
51
Configuring MAC Address Filters
Use the Setup Advanced Settings – MAC Filtering page to configure MAC
address filters. These filters prevent individual MAC addresses from accessing
the Internet. You can also prevent individual PCs from sending outgoing
TCP/UDP traffic to the WAN using their MAC address.
If you are not familiar with the advanced settings detailed in this section,
contact your cable service provider before you attempt to change any of the
cable modem gateway default advanced MAC filtering settings.
Click MAC Address Filtering in the Advanced Settings section of the Setup
page to access the Setup Advanced Settings – MAC Filtering page.
Setup Advanced Settings – MAC Filtering Page Example
The following illustration is an example of the Setup Advanced Settings – MAC
Filtering page.
Setup Advanced Settings – MAC Filtering Page Description
Use this page to enter the MAC address or MAC addresses you want to filter into
the appropriate fields, and click Apply to apply and save your new MAC address
filter settings.