Sanyo SCP-7300 - Manual (Page 72)

64
Selecting a Ringer/Image Type for an Entry
You can assign a ringer/image type to a Contacts entry so you
can identify the caller by the ringer or image type.
To select a ringer type for an entry:
1. Press the navigation key right.
2. Select the entry you want to set as the incoming ringer and
press .
3. Highlight a phone number, press (right softkey),
highlight Edit, and press .
– or –
Highlight an Email address or Web address, and press
(right softkey).
4. Select the menu under Ringer and press .
5. Select a ringer type by scrolling up or down and press .
ᮣ Ringer Type to select a ringer type. You can hear each ringer
type by scrolling.
ᮣ Ringer & Voice to notify you with Ringer and Voice.
ᮣ Vibrate to notify you by vibrating.
ᮣ Normal to set Ringer to the With Caller ID or Roaming setting
(see page 22).
ᮣ None to turn the ringer type off.
ᮣ Get New to start up the Browser so you can select an item to
download.
6. Press (left softkey).
ᮣ To confirm the ringer, highlight Ringer and press (right
softkey).
Play
Save
Edit
Options
7300 Bell_EN_3b.qxd 05.1.14 13:37 Page 64