Sony VGN-BX600 - Manual (Page 98)

98 n N
Using Peripheral Devices
Connecting a Projector
You can connect a projector (for example, the Sony LCD projector) directly to your computer or via the optional multi function
bay docking station.
To connect a projector
!
The monitor (VGA) port on the computer is disabled when the computer is attached to the multi function bay docking station.
1 Connect the power cord (1) of your projector into an AC outlet.
2 Plug an RGB signal cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the multi function
bay docking station.
3 Plug an audio cable (4) (not supplied) into the headphones jack (5) i .
4 Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).