Sharp Aquos LC 65D64U - Manual (Page 17)

PC
31.5 kHz
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7 kHz
640 x 480
720 x 400
VGA
800 x 600 SVGA
XGA 1024 x 768
WXGA 1360 x 768
70 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz O
O
O
O
O
O
O
O
O
O
O
64.0 kHz SXGA 1280 x 1024 60 Hz O
64.0 kHz SXGA+ 1400 x 1050 60 Hz O
75.0 kHz UXGA 1600 x 1200 60 Hz O
HDMI cable
(commercially available)
HDMI equipment
HDMI cable
(commercially available)
Connecting HDMI equipment
You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.
NOTE
• When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 6.
• To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external equipment
using an HDMI cable and set the equipment to 1080p output.
15
Preparation
PC
PC compatibility chart
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 38 to set PC input signals.
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Corp.
PC Horizontal Frequency VESA Standard Resolution Vertical Frequency
Connecting a PC
When connecting to a PC with an analog RGB terminal. (INPUT 7)
RGB cable
(commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
When connecting to a PC with an HDMI terminal. (INPUT 4, 5 or 6)
PC
NOTE
• The HDMI terminals only support digital signal.