How to temporarily release the v-chip block, Reactivating the temporarily released v-chip block, Digital setup – Sharp Aquos LC 65D64U User Manual

Page 49: Audio setup, Identification

Advertising
background image

47

How to temporarily release the
V-CHIP BLOCK

When the V-CHIP BLOCK is working and censors a
broadcast, “V-CHIP HAS BEEN ACTIVATED.” displays.

Reactivating the temporarily
released V-CHIP BLOCK

You can reactivate the temporarily released V-CHIP
BLOCK as shown below.

Method 1:

Select “Status” setting from the Parental CTRL menu

to reactivate BLOCK. (See page 41.)

Method 2:

Select “V-Chip” setting (“MPAA”, “TV Guidelines”,

“Can. English Ratings” or “Can. French Ratings”)
from the Parental CTRL to reactivate BLOCK. (See
pages 44 and 47.)

Method 3:

Switch off the TV power.

NOTE

• Performing any of the three above will activate the V-CHIP

BLOCK.

Press ENTER while the V-CHIP is working,
and then the secret number setting menu
displays.

Input the 4-digit secret number by using 0–
9. At this time V-CHIP BLOCK temporarily
releases.

2

1

Useful adjustment settings

PCM

Dolby Digital

Audio Setup

You can output digital audio to an AV amplifi er or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.

Press

a/b to select “PCM” or “Dolby Digital”,

and then press ENTER.

Digital Setup

This setting allows you to optimize the settings of
Digital broadcasting.

Press MENU to display the MENU screen, and
then press

c/d to select “Digital Setup”.

Press

a/b to select “Audio Setup”, and then

press ENTER.

1

3

2

Press MENU to exit.

4

Selected item

PCM

Dolby Digital

Description

The optical output terminal outputs audio
signal in PCM form. If your digital audio
system does not support Dolby Digital,
select “PCM”.

The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces
sound from surround program of digital.

Identifi cation

Press MENU to display the MENU screen, and
then press

c/d to select “Digital Setup”.

Press

a/b to select “Identifi cation”, and then

press ENTER.
The current version of the TV software is
displayed.

2

1

Advertising