Sharp Aquos LC 65D64U - Manual (Page 23)

ENTER : Select : Enter MENU : Exit RETURN : Back
On-Screen Display
1 Item displayed in yellow
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for this
item.
2 Item in brackets
• This indicates the current setting for the item.
3 Item displayed in white
• This indicates an item can be selected.
4 Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why items cannot be
selected, but the main reasons are as follows:
— Nothing is connected to the selected input terminal.
— The function is not compatible with the current input
signal.
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Option
Audio Only
AQUOS LINK Setup
Digital Noise Reduction
Input Select
Color System
[Off]
[VIDEO]
Output select [Fixed]
[Auto]
[No] Program Title Display
[Off] Game Play Time
[Off] Operation Lock Out
Digital Caption Info.
Caption Setup
21
Basic adjustment settings
Menu operation buttons
■ Using the remote control
Use the following buttons on the remote control to
operate the menu.
MENU: Press to open or close the menu screen.
a/b/c/d: Press to select a desired item on the
screen or adjust a selected item.
ENTER: Press to go to the next step or complete
the setting.
RETURN: Press to return to the previous step.
Example
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
■ Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
MENU: MENU on the remote control.
INPUT: ENTER on the remote control.
CH
r / s : Cursor a/b on the remote control.
VOL k/l: Cursor c/d on the remote control.