Sony Playstation 2 SCPH-90001 - Manual (Page 12)

12
You can play PlayStation ® 2 and PlayStation ® format software on the PlayStation ® 2
console.
Insert the disc to start playback.
Resetting a game
Press the ?/1/RESET button. Be careful not to accidentally press the ?/1/RESET
button while playing a game, as doing so will cause the game to reset.
Ending a game
After saving game data, turn the console off, and then remove the disc.
The analog controller (DUALSHOCK ® 2) is equipped with pressure-sensitive
buttons and sticks. This enables you to control game action with enhanced precision
based on the force with which buttons are pressed or the angle at which the analog
stick is tilted. It is also a force feedback controller with a vibration function.
Switching modes
Depending on the game, you may need to set the controller to either digital or analog
mode. Press the ANALOG mode button of the controller to switch to the analog
mode (indicator: red). To return to digital mode, press the ANALOG mode button
again. Some games make this adjustment automatically.
You can save and load game data using a memory card (sold separately). You can
also delete game data or copy game data from one memory card to another.
Memory card types
There are two types of memory cards. Select a memory card suitable for the software
in use.
MagicGate™ is a term of copyright-protection technology developed by Sony
Corporation.
Inserting a memory card
Insert the memory card into a memory card slot. Some games designate a specific
memory card slot to use.
Playing a game
Starting a game
Using the analog controller (DUALSHOCK ® 2)
Using memory cards
Memory card type Compatible software Amount of memory
Memory card (8MB)
(for PlayStation
® 2)
(SCPH-10020 U)
PlayStation ® 2 format software Approx. 8 MB
Memory card
(SCPH-1020 U)*
* This product is no
longer manufactured.
PlayStation ® format software
15 memory blocks
(approx. 120 KB)
MEMORY CARD MEMORY CARD
Memory card slots