Sony Playstation 2 SCPH-90001 - Manual (Page 2)

2
To reduce the risk of fire or electric shock, do not expose this apparatus to rain
or moisture.
To prevent fire or shock hazard, do not place a container filled with liquids on
top of the console.
To avoid electrical shock, do not disassemble. Refer servicing to qualified
personnel only.
Caution
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
The use of optical instruments with this product will increase eye hazard.
This appliance is classified as a CLASS 1 LASER product under IEC60825-1: 2001.
This graphical symbol with supplemental marking is located on the bottom surface
of the PlayStation
® 2 console (when it is in a horizontal position).
This symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the console.
Place the console at least 10 cm (4 in) away from walls or surrounding objects.
Placing the console close to walls or other objects can cause it to overheat.
Software title compatibility
Some PlayStation ® or PlayStation ® 2 format software titles may perform differently
on this console than they do on previous PlayStation ® 2 or PlayStation ® consoles, or
may not perform properly on this console. For more information, visit our Web site
at http://www.us.playstation.com or call SCEA Consumer Services at 1-800-345-
7669.
About the lithium coin memory back-up battery
The lithium coin memory back-up battery inside this product contains Perchlorate.
The following statement is required by the State of California, USA: Perchlorate
Material - special handling may apply, See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate
Warning
10 cm (4 in)