Sony HTSS370 - Manual (Page 41)

41 GB
“BRA
VIA” Sync Fea
ture
s
8 Repeat step 6 and 7 to set the Control
for HDMI function for other connected
component.
Notes
• When you unplug the HDMI cable or change the
connection, perform the steps given in “When your
TV is compatible with the “Control for HDMI-
Easy Setting” function” (page 40) or “When your
TV is not compatible with the “Control for HDMI-
Easy Setting” function” (page 40).
• You cannot perform One-Touch Play and System
Audio Control during Control for HDMI-Easy
Setting operation.
• Before you do the Control for HDMI-Easy Setting
from the TV, be sure to turn on the TV, connected
components and receiver.
• If the playback components cannot function after
you have made the settings for Control for HDMI-
Easy Setting, check the Control for HDMI setting
on your TV.
• If the connected components do not support
Control for HDMI-Easy Setting, you need to set
the Control for HDMI function for the connected
components to on before you perform the Control
for HDMI-Easy Setting from the TV.
Playing back components
with one-touch operation
(One-Touch Play)
By a simple operation (one touch),
components connected to the receiver with
HDMI connections start playback
automatically.
You can enjoy the sound/image using the
connected components.
Play back a connected component.
The receiver and the TV are turned on
automatically and switched to the appropriate
HDMI input.
Note
Be sure that the System Audio Control setting is set
to on using TV menu.
Watching a DVD/Blu-ray Disc by
simple operation
You can also select a connected component,
such as a DVD/Blu-ray Disc player using the
TV menu. In this case, the receiver and the TV
switch to the appropriate HDMI input.
Note
Depending on the TV, the start of the content may
not be output.
Tip
You can enjoy the components that are connected to
the HDMI jacks, even if you turn the receiver off.
The POWER/ACTIVE STANDBY indicator lights
up in amber.