Specifications, Error messages, If the problem persist – Sony HTSS370 User Manual

Page 72

Advertising
background image

72

GB

Error messages

If an error message appears while you perform
Auto Calibration, see “When error codes
appear” (page 28) to solve the
problem.

If you are unable to remedy the
problem using the
troubleshooting guide

Clearing the receiver’s memory may remedy
the problem (page 24). However, note that all
memorized settings will be reset to their initial
settings and you will have to readjust all
settings on the receiver.

If the problem persist

Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
In the event of a problem with S-AIR function,
have a Sony dealer check the entire system
together (S-AIR main unit and S-AIR sub
unit).

Reference sections for clearing
the receiver’s memory

Specifications

Amplifier section

POWER OUTPUT (rated)
FRONT L + FRONT R

108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)

POWER OUTPUT (reference)
FRONT L/FRONT R/CENTER/SUR L/SUR R

167 W (per channel at

3 ohms, 1 kHz)

SUBWOOFER

165 W (at 3 ohms, 60 Hz)

Inputs

Analog

Sensitivity: 1 V/50 kohms

Digital (Coaxial) Impedance: 75 ohms

HDMI Video

Input/Output (HDMI Repeater block)
640 × 480p@60 Hz
720 × [email protected]/60 Hz
1280 × [email protected]/60 Hz
1920 × [email protected]/60 Hz
1920 × [email protected]/60 Hz
720 × 576p@50 Hz
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz

HDMI Video (3D)

Input/Output (HDMI Repeater block)
1280 × [email protected]/60Hz Frame packing
1920 × [email protected]/60Hz Frame packing
1920 × [email protected]/60Hz Side-by-Side (Half)
1920 × [email protected]/60Hz Side-by-Side (Half)
1280 × 720p@50Hz Frame packing
1920 × 1080i@50Hz Frame packing
1920 × 1080i@50Hz Side-by-Side (Half)
1920 × 1080p@50Hz Side-by-Side (Half)
1920 × 1080p@24Hz Frame packing

To clear

See

All memorized settings

page 24

Advertising