Sony STR-DH510 - Manual (Page 62)

62 GB
x SL DIST.
x SR DIST.
Lets you set the distance from your listening
position to the surround speakers.
x SW DIST.
Lets you set the distance from your listening
position to the subwoofer.
Notes
• Depends on the speaker pattern setting, some
parameters may not be available.
• This function does not work in the following cases.
– Signals with a sampling frequency of more than 48
kHz are being received.
– the multi channel Linear PCM signals are received
via an HDMI IN jack.
– Analog Direct is selected.
x DIST.UNIT
Lets you select the unit of measure for setting
distances.
• METER
The distance is displayed in meters.
• FEET
The distance is displayed in feet.
x FRT CRS.
Lets you set the bass crossover frequency of
the front speakers that have been set to
“SMALL” in the SPEAKER menu.
x CNT CRS.
Lets you set the bass crossover frequency of
the center speaker that have been set to
“SMALL” in the SPEAKER menu.
x SUR CRS.
Lets you set the bass crossover frequency of
the surround speakers that have been set to
“SMALL” in the SPEAKER menu.
You can select the sound field you want for
your listening pleasure.
x S.F. SELCT
Lets you select the sound field you want. For
details, see “Enjoying Surround Sound” (page
42).
Note
The receiver lets you apply the last selected sound
field to an input whenever it is selected (Sound Field
Link). For example, if you select “HALL” for the
DVD input, then change to a different input and then
return to DVD, “HALL” will automatically be
applied again.
x EFFECT
Lets you adjust the “presence” of the surround
effect for the Cinema Studio EX A/B/C sound
fields.
You can adjust the tonal quality (bass/treble
level) of the front speakers.
x BASS
x TREBLE
Note
This function does not work in the following cases:
– signals with a sampling frequency of more than
48kHz are being received.
– the multi channel Linear PCM signals are received
via an HDMI IN jack.
– Analog Direct is selected.
SURROUND menu
EQ menu