Sony STR-DH510 - Manual (Page 66)

66 GB
Changing the input button
assignments
You can change the initial settings of the input
buttons to suit the components in your system.
For example, if you connect a Blu-ray disc
player to the DVD jack on the receiver, you
can set the DVD button on this remote to
control the Blu-ray disc player.
Note
You cannot change the remote assignments for
DMPORT, TUNER and TV input buttons.
1
While holding down the input
button of which you want to
change the assignment, hold
down AV ?/1.
Example: While holding down DVD,
hold down AV ?/1.
2
With the AV ?/1 button held,
release the input button you
selected in step 1.
Example: With the AV ?/1 button held,
release DVD.
3
Referring to the following table,
press the corresponding
button for the category you
want, then release AV ?/1.
Example: Press 1, then release AV ?/1.
Now you can use the DVD button to
control the Blu-ray disc player.
Categories and the
corresponding buttons for BD,
DVD, SAT/CATV, VIDEO and
SA-CD/CD
a)
For details on the BD1 or BD3 setting, refer to the
operating instructions supplied with the Blu-ray
disc player or Blu-ray disc recorder.
b)
Sony DVD recorders are operated with a DVD1 or
DVD3 setting. For details, refer to the operating
instructions supplied with the DVD recorders.
c)
Sony VCRs are operated with a VTR 2 or VTR 3
setting which corresponds to 8 mm and VHS
respectively.
d)
RM-AAU071 only.
e)
RM-AAU074 only.
Using the Remote
BD DVD
SAT/
CATV
VIDEO SA-CD/
CD
DMPORT TUNER
TV
Assignable
Input
buttons
Numeric
buttons
AV ?/1
Categories Press
Blu-ray disc player
(command mode BD1)
a)
1
Blu-ray disc recorder
(command mode BD3)
a)
2
DVD player
(command mode DVD1)
3
DVD recorder
(command mode DVD3)
b)
4
VCR (command mode VTR3)
c)
5
CD player 6
DSS (Digital Satellite Receiver)
d)
/
Euro Digital Satellite Receiver
e)
7