Symbol Technologies PTC-860IM - Manual (Page 19)

1. Remove the PTC from the box.
2. Remove all packing material from the PTC. Save the
packing material in case the PTC is ever stored or shipped
to Telxon for service.
3. Check the contents of the package to make sure you have
received everything ordered.
4. Check the PTC and accessories for shipping damage. Pay
particular attention to the PTC case, display lens, and
bar-code reader, if included.
If anything is missing or damaged, notify your Telxon sales
representative.
ᮣ
Turning on the backup battery
The PTC-860 is shipped with the backup battery disconnected
so the backup battery is fully charged when you receive your
PTC. Follow the procedure below to turn on the backup battery
before you use the unit for the first time.
Equipment required:
• A small screwdriver or the screwdriver on the
PTC-860’s elastic strap
• A pen or pencil
1. Make sure the PTC is off.
2. Disconnect any accessories and remove the elastic strap
from the PTC.
3. Locate the battery door and the two screws securing it.
4. Unscrew the two screws and remove the battery door.
Note: Do not remove the screws from the battery door. The
screws are designed to stay in the door when it is removed
from the PTC.
17