Handling the ptc-860 – Symbol Technologies PTC-860IM User Manual

Page 43

Advertising
background image

CAUTION! Do not operate a PTC-860NI with any
attached accessories in a hazardous location. Accessories
are approved for use with the PTC-860NI only in
non-hazardous locations.

ᮣ

Handling the PTC-860

The following information can help to ensure you receive
reliable, trouble-free service from your PTC-860.

•

Do not open the PTC-860’s case. Only a trained technician
can service the parts inside the PTC’s case.

•

If you store a PTC-860 containing a nickel-cadmium battery
pack in below-freezing temperatures for more than 1 hour,
do not charge the battery pack until it warms up to room
temperature.

•

Make sure the PTC-860 is off before you connect or remove
any accessories or replace the batteries.

•

Make sure all accessories connected by cable are connected
correctly and all accessories are locked into place.

•

Do not connect or use any accessories with a PTC-860NI in
a hazardous location.

•

Use only an AFAT nickel-cadmium battery pack in the
PTC-860NI.

•

Use only Telxon-approved batteries and accessories. Do not
attempt to connect any electrical device that is not part of
your PTC-860 system to the PTC-860.

•

Protect the PTC-860 from excessive heat, cold, and
moisture and from harsh, dirty environments.

•

Do not insert anything into the 25-pin connector.

•

Do not remove any of the rubber or plastic plugs on the
PTC-860’s case, except to add a bar-code reader.

41

Advertising