Sanyo PLC-XF60A - Manual (Page 31)

31
Basic Operation
Basic Oper
ation
Press the FREEZE button on the remote control to freeze the
picture on screen. To cancel the Freeze function, press the
FREEZE button again or press any other button.
Press the P-TIMER button on the remote control. The timer
display “00 : 00” appears on the screen and the timer starts to
count time (00 : 00 ~ 59 : 59).
To stop the counting, press the P-TIMER button. And then, press
the P-TIMER button again to cancel the P-Timer function.
P-Timer Function
SCREEN button
Normal
Wide
True
Full screen
Select a screen size among Normal, Wide, True, Full screen, and
Custom by pressing the SCREEN button on the remote control.
Refer to the Screen menu on page 47 for details of each screen
setting.
Keystone function is provided to correct image distortions.
Press the KEYSTONE button on the remote control and correct
vertical and horizontal distortions with the Point buttons (e, d, 7,
and 8) or the Control pad. The Keystone adjustment can be
memorized. (p.48)
Custom
• The arrows are white when there is no correction.
• The arrows disappear at the maximum correction.
• The direction of the arrow being corrected turns red.
• If you press the KEYSTONE button on the remote
control once again while the keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
Picture Freeze Function
Screen Selection
Keystone Adjustment
✔
Note:
True cannot be selected when selecting AV sources for the Input.
✔
Note:
Horizontal keystone is ineffective for PLC-EF60A.