Sony STR-DA7100ES - Manual (Page 78)

78 GB
2
Hold down MEMORY/ENTER
and press ?/1 to turn the
receiver back on.
“Autobetical select” appears on the
display and the receiver scans and stores
all the FM and FM RDS stations in the
broadcast area.
For RDS stations, the tuner first checks
for stations broadcasting the same
program, then stores only the ones with
the clearest signal. The selected RDS
stations are sorted alphabetically by their
Program Service name, then assigned a 2-
character preset code. For more details on
RDS, see page 80.
Regular FM stations are assigned 2-
character preset codes and stored after the
RDS stations.
When this process is finished,
“Autobetical finished” appears on the
display momentarily and the receiver
returns to normal operation.
Notes
• Do not press any button on the receiver or supplied
remote during autobetical operation, except ?/1.
• If you move to another area, repeat this procedure
to store stations in your new area.
• For details on tuning the stored stations, see
“Tuning to preset stations” on page 79.
• If you move the antenna after storing stations with
this procedure, the stored settings may no longer be
valid. If this happens, repeat this procedure to store
the stations again.
Presetting radio stations
You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
1
Turn INPUT SELECTOR to
select tuner.
2
Press FM/AM to select “FM” or
“AM.”
3
Tune in the station that you
want to preset using Automatic
Tuning (page 76) or Direct
Tuning (page 76).
Switch the FM reception mode, if
necessary (page 76).
4
Press MEMORY/ENTER.
“MEMORY” appears on the display for a
few seconds. Perform steps 5 and 6 before
the display goes out.
Presetting radio stations
1
2 5 4,6