Sony PlayStation 2 - Manual (Page 33)

33
US
Installing the DVD Player software
You can use the Install DVD Player utility to install the DVD Player software on a
memory card (8MB) (for PlayStation
®
2).
1
Insert a memory card (8MB) (for PlayStation
®
2) into MEMORY CARD slot 1 on
the PlayStation
®
2 console front.
2
Start HDD Utility Disc (ver 1.10).
The opening screen will appear. Then, after several seconds, the Basic Operations
screen will appear.
3
At the Basic Operations screen, press the × (Enter) button.
The Utilities menu will appear.
4
Select the Install DVD Player utility from the Utilities menu, and then press
the
× button.
5
Proceed with the utility according to the on-screen instructions.
The current status will appear on the screen while the utility is in use.
When the operation is completed, remove HDD Utility Disc (ver 1.10), and store it
in a safe place for future use.
Notes
• Check that the HDD unit is properly installed in your PlayStation
®
2 console. If the HDD unit
is not properly installed, the software installation could fail, resulting in damage to the
contents of the HDD.
• The DVD Player software can be installed on a memory card (8MB) (for PlayStation ® 2) (sold
separately). Copying is not possible with the memory card (8MB) (for PlayStation
®
2) inserted
into MEMORY CARD slot 2 on the PlayStation ® 2 console front.
• The memory card (8MB) (for PlayStation
®
2) must have at least 2,200KB of free space to install
the DVD Player software. If you use a memory card (8MB) (for PlayStation ® 2) containing the
DVD Player for this installation, the existing version will be overwritten.
• Do not remove the memory card (8MB) (for PlayStation ® 2) during software installation or
before playback of the DVD video starts.
• To help prevent software or data loss or corruption during installation:
– do not open the disc tray
– do not turn off the PlayStation
® 2 console, or press the 1 (standby)/RESET button
– do not remove the HDD unit from the console.