Advanced recording operations – Sony TC-WE625 User Manual

Page 17

Advertising
background image

17

EN

Advanced Recording Operations

3-862-713-31(1)/CED/SP

7

Press SYNCHRO.

If your CD player has the Peak Search function:

The SYNCHRO button indicator lights up and the CD
player locates the highest signal level among the tracks
to be recorded as the tape deck adjusts the recording
level. When the recording level adjustment is
completed, CD Synchro-Recording starts.

If your CD player does not have the Peak Search
function:

The CD player changes to play pause and deck B to
recording pause. Press PAUSE

P on deck B to start

Synchro-Recording.

To stop CD Synchro-Recording

Press

p on deck B or the CD player.

z

You can use an optional remote to operate the CD
player

To start CD play, press

P twice; to pause CD play, press

P once; to locate a CD track, press = or +.

z

If the SYNCHRO button indicator goes off after
flashing three times

The tape cannot be recorded on because the record-
protect tab(s) on the cassette has (have) been removed.

z

Length of tape used for recording

Tracks on a CD differ in length. Classical music CDs
and others often have tracks that exceed the recording
time of a single cassette side. In this case, record the
tape manually.

z

When recording from the middle of the tape

A tape that is inserted and has not been played or
recorded on is assumed by the deck to be a new tape,
even if the present location is in the middle of the tape.
The deck will transport the tape for 10 seconds before
starting CD Synchro-Recording to bypass the portion
corresponding with the leader. To begin CD Synchro-
Recording without the ten-seconds delay, play or record
on the tape for a few seconds before starting the CD
Synchro-Recording procedure.

z

If the tape ends during CD Synchro-Recording on the
front side of the tape (

· lights up) and DIRECTION

MODE is set to

a or RELAY

Recording of the track ends immediately, the tape
direction is reversed, and recording starts again from
the beginning of the track. If the tape ends on the
reverse side of the tape (

ª lights up), CD Synchro-

Recording stops and the CD player stops playing.

Notes

• To prevent interruption of the recording process, do not

press any operation buttons on the CD player during CD
Synchro-Recording.

• Certain operation buttons on the tape deck are disabled

during CD Synchro-Recording.

6/11-17_TC-WE825S.31(1)EN

8/19/98, 4:25 PM

17

Advertising
This manual is related to the following products: