Sanyo PLV-55WHD1 - Manual (Page 17)

17
CONNECTING ANALOG AUDIO OUT JACKS
TO A STEREO AMPLIFIER
Switch off the LCD Projection TV and external equipment
before connecting cable. (Cable is not supplied.)
1 Connect the LCD Projection TV’s AUDIO OUT (R/L)
to the Stereo Amplifier In (R/L).
Note: For Mono Audio Amplifier (Single Audio Jack),
connect to AUDIO-L (MONO) Input.
2 Optional:
Connect WOOFER jack to the Woofer Amplifier
Input.
3 Press POWER to turn on the LCD Projection TV,
then turn on external equipment.
S-VIDEO
VIDEO
R-A Y–––––Pb–––––Pr
VIDEO
3
VIDEO
2
VIDEO
1
WOOFER
AUDIO
OUTPUT
Y–––––Pb–––––Pr R-A
R-A
R-AUDIO-L (MONO)
PTV BACK
1
STEREO AMPLIFIER
1
4 5 6
2 3
INPUT
POWER
REMOTE CONTROL
3
WOOFER AMPLIFIER
2
What you will need for connections:
Audio Cable – 1
Audio Cable (RCA x 1) – 1
AUDIO
CABLE
AUDIO CABLE
(RCA X 1)