Sanyo PLV-55WHD1 - Manual (Page 9)

9
• Press the POWER key on the front panel of the LCD
Projection TV or on the remote control. The cooling
fans start to operate and the POWER indicator flashes
green, and after a few seconds it lights green.
POWER
LAMP
REPLACE WARNING POWER
FRONT PANEL
POWER key
When the television is powered on for the
first time, it automatically checks for the
presence of an RF signal. The initial screen
will be displayed.
• Press the CHANNEL UP (CH e) key
to automatically search for available
channels: Digital (ATSC) and Analog
(NTSC).
The All Channel Search contains two processes that are
executed simultaneously for digital and analog channels.
➠
Notes:
Channel information found during the All Channel Search is
stored in two Channel Scan Memory databases (Analog
and Digital). After all channel search is completed, the TV
will tune to the lowest Digital channel or lowest Analog
channel if no digital channels are found.
If the TV does not detect any digital or analog channels, a
message advising the viewer to check the cables and
antenna connections will appear. In this case, you must
press the Channel Up (CH e) key again to repeat the
channel search process. If after two searches the TV still
fails to detect any channels, the TV will tune to analog
channel 3.
If no analog or digital channels are found after the
second search, All Channel Search will default to off-air
analog channels 2 through 69 and digital channel D3-1.
Select analog channels using the remote control keypad.
See page 18, item number 2.
To change the initial analog tuning system setup (from
antenna to cable or cable to antenna), use the on-screen
menu, see “Analog Antenna Signal” on page 22.
4
5
6
ANTENNA SIGNAL SELECTION
(OPTIONAL)
ALL CHANNEL SEARCH
TURN ON THE LCD PROJECTION TV
POWER indicator
SKIP THE CHANNEL SEARCH PROCESS
Use this feature only if the LCD Projection TV is used
primarily for playing video games, or watching videos, or
if you receive local channels from a satellite receiver or
cable system.
1
4
5 6
7 8
0
9
2 3
INPUT
INFO
RECALL
MENU
CAPTIO N
EXIT
VOL
ENTER
TUNER MUTE
SLEEP
CH
POWE