6) camera and monitor connections – Samsung SMO-210DN User Manual
Page 32
English-2-18
2-6) Camera and Monitor connections
1) External terminal connecting method for CAMERA
•
An additional PIR sensor or external sensor can also be connected.
•
The additional PIR sensor can be connected as shown in the illustration above.
•
Sensor’s trigger signal is NO (Normal Open).
•
Sensor is not supplied. (Sold separately)
a. Connect the A/O (HOT) terminal on the rear panel to the Alarm IN terminal of External device.
b. Connect the A/O (COLD) terminal on the rear panel to the Ground terminal of External device.
c. Connect the A/R terminal on the rear panel to the Alarm Reset terminal of External device.
d. Connect the G (ground) terminal on the rear panel to the Ground terminal of External device.
PIR Sensor
Sensor in put
Camera alarm injack
Sensor