Samsung SMO-210DN User Manual
Page 41
English-3-3
KEY
SCREEN SAVE
MENU
FREEZE
PIP
PLAY/STILL
STOP
REC(LED)
REC LOCK
(LED)
MULTI SCREEN
SEARCH
FEATURE
(1) ON: Enters into power save mode.
(2) OFF: Screen is displayed in a basic activation status.
Displays MAIN MENU, and pressing MENU button once more will
exit the MENU screen.
Pressing FREEZE button will freeze the current screen being displayed,
and pressing FREEZE button once more will cancel the freeze.
Freeze marker will be displayed at the top of the screen in Freeze
Mode.
Pressing PIP button in Single Screen will change to PIP mode.
However, at least two channels must be input.
(1) Pressing up (down)/left (right) button will move sub-screen
according to 1, 2, 3, 4, 5, 6, 7, 8 priority sequence and skip the Loss
channel (channel with no signal) and Main screen.
(2) Main/Sub-screen Switch: Screen switching will happen when
pressing ENTER button in PIP screen.
Pressing PLAY/STILL button in LIVE status will switch to PLAY
screen and what’s recorded in HDD is played back. Pressing
PLAY/STILL button again during PLAY will switch to STILL status.
And pressing PLAY/STILL button again during STILL will switch
the unit back to PLAY. PLAY/STILL Marker will be displayed at the
top of the screen.
Pressing STOP during PLAY/STILL will stop PLAY and switch to
LIVE screen. Pressing STOP button in REC Mode will stop REC.
Pressing STOP button in Simultaneous Record and Playback Mode
will stop PLAY, and pressing it again will stop REC.
Pressing REC button will illuminate LED that is at the top of REC
button and start REC.
REC ( ) Marker will be displayed at the left top of the screen during
REC
Pressing REC LOCK button will illuminate LED that is at the top of
REC LOCK button. Pressing STOP button will not cancel REC at this
time. Pressing REC LOCK button again will turn off REC LOCK
LED and cancel REC LOCK.
The screen displays 8 split screens after initial booting. LIVE/PB is
also 8 split screen at the initial stage. Pressing the key will cycle
between QUAD A, QUAD B, and 8 Split.
Search video/audio signals recorded in HDD by inputting date/time
they were recorded, or by selecting EVENT through RECORD,
ALARM EVENT LIST. You may also view POWER EVENT LIST
and LOSS EVENT LIST.
Note
NO
5
6
7
8
9
10
11
12
13
14