Sony HES-V1000 - Manual (Page 116)

116
System Settings
The default settings are underlined.
Brightness of Front Panel Bright
– Indicators and the top and front panel displays light up brightly.
Dark
– The indicators and the top and front panel displays light up dimly.
Dim
– The top and front panel displays turn off when the power is off, and light up dimly
when the power is on, although they turn off during playback of video, photo, and
music.
Note
Setting to [Dim] does not turn off the indicators.
HDMI Control On
– Activates the function.
Off
– Turns off the function.
– Select whether to activate the HDMI Control
function of the server (page 24).
Standby Mode Standard
– This mode uses (slightly) more electricity because the server is in a standby status
even when turned off. For example, music and videos will start playing sooner when
you press \/1, etc.
This is automatically selected if you set Music [Music Server Settings] to [On] in
[Network Settings] (page 122).
Eco
– This mode uses less electricity because the power saving mode is enabled during
standby mode.
For example, the ventilation fan does not rotate.
Notes
• [Standard] consumes more standby power as the internal controller carries current and rotates
the ventilation fan.
• If [Eco] is selected, the server's music sharing function, and the music file transfer function from
PCs cannot be used.
• When [Standard] is selected, the server can distribute or receive audio data even in standby
mode. To use these functions while in standby mode, you will need to make additional settings
on the client device or “Music transfer” on the PC.
For “Music Transfer”: On the “File” menu, click [Select Server], and after selecting the server,
click [Startup Server] (page 50)
For client devices: Settings differ depending on the device. See instructions supplied with the
device.
– There are two modes of operation that
determine how fast the server becomes
operable after you turn on the power.
Auto Display On
– Displays the information at the time of change.
Off
– Does not display the information automatically.
– When changing the viewing titles, picture
modes, audio signals, etc., you can check the
information about the change on screen
(name of the title, the picture mode or the
signal).
Software Update Disc Update
– Updates the server's software using a software update disc. See “Updating the
software using an update disc” (page 140) for details.
Network Update
– You can update by downloading the update data from the Internet. See “Updating the
server’s software using the network” for details (page 141).
– Updates the server software using a software
update disc or connecting to the network.
Brightness of Front Panel Bright
Off HDMI Control
Standard
On
Standby Mode
Audio Display
Software Update
Settings