Sony HES-V1000 - Manual (Page 96)

96
f Select [Finalize] or [DVD Menu] and press
ENTER.
The DVD Menu creation display appears.
To zoom the wallpaper, press the YELLOW button.
If [Finalize] is not selectable, the disc has previously
been finalized.
g Select the DVD Menu and press ENTER.
h On the confirmation screen, check the time
required for finalizing, select [Yes] and press
ENTER.
z Hint
You can use the disc information display to check if the disc is finalized.
When [Finalized] is selectable, the disc is not finalized.
To unfinalize the disc (DVD-RW VR mode, DVD-
RW (Video mode) only)
◆For DVD-RW (Video mode)
Unfinalizing makes the disc recordable and editable again.
Note that you cannot unfinalize if the disc was finalized on
another device.
1
Insert a finalized DVD-RW (Video mode) by
pressing Z.
2
Repeat steps 1 to 3 to turn on the disc information
display.
3
Select [Unfinalize] and press ENTER.
Unfinalizing may take several minutes.
◆For DVD-RW (VR mode)
When a DVD-RW (VR mode) finalized on another DVD device
does not accept recording or editing, a message appears
indicating that it is a finalized disc and that you need to
unfinalize. In such case, select [Unfinalize] on the disc
information display as above.
However, you may not be able to unfinalize the disc, depending
on the device used for finalizing.
About Recording Modes
For importing/copying, two methods are available: High-speed
Importing/Copying (without changing the recording mode), and
Rec Mode Conversion Importing/Copying (reducing the data
size converting to the different recording mode from the original
recordings). Read the following and select according to the
required time, disc space, and picture quality.
Importing/copying at high-speed (High-speed
Importing/Copying)
n
Allows you to copy titles from HDD to a BD or import to HDD
from a BD, without changing the mode.
Select [High-Speed] in [Recording Mode] when importing/
copying (page 97). See page 150 for required time for
importing/copying.
z Hints
• When importing/copying the edited titles at high-speed, the “seams”
that are left over from editing may remain on the disc.
• Importing/copying between HDD and DVD automatically set to Rec
Mode Conversion Importing/Copying.
Rec Mode Conversion Importing/Copying
,
n
Allows you to import/copy a title from the HDD to a DVD or
vice versa, or import from HDD to a BD, in a recording mode
that differs from the original recordings. For example, when you
import/copy a title recorded in XR mode (high quality, but large
data size) to SP mode, you can reduce the data size, saving more
titles using less space.
If you copy a title of HDD recorded in DR or XR mode to a BD
in SR, LR, or ER mode, or to a DVD in SP or LP recording
mode, the unit automatically set the optimum picture quality,
which makes the deterioration in the image quality minimum.
To automatically adjust the recording mode
according to the available space
,
1
Select [Settings] from the video copy display and
press ENTER.
2
Select [Auto Adjust] and press ENTER.
DR : 35H11M
4.4/4.7GB
LP
XP
EP
SP
Disc Information
Disc Name
Media
Title Total
Rec Date
Remaining
DVD-RW Format Video
2
7/13/2007
Recordable
Time : 0H59M : 1H59M
: 4H01M : 5H56M
Name Input
Finalize
DVD Menu
Format
RETURN Finish
Close
1. Blue
2. RED
3. Picture
Finalize - DVD Menu Selection
RETURN Return
Select the DVD Menu used for finalizing
Cancel
Y Zoom in/Zoom out
Copy Title - Settings
Set the copy mode.
Start
Finish
Change Title
Auto Adjust
DVD Menu
Finalize
Disc Name
Change Disc
RETURN Finish OPTIONS Function
Remaining:4.6GB 5.3GB
NEW
NEW
XR
SR
XP
SP ORG
ORG
2
1
1.2GB
4.0GB