Samsung DVD-R119 - Manual (Page 19)

Case 3 : Component Video output
jacks
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,P B ,P R ) jacks on
DVD RECORDER and COMPONENT IN(Y,P B ,P R )
jacks on your TV.
• You will enjoy high quality and accurate colour
reproduction images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the DVD RECORDER and
AUDIO IN jacks on TV (or AV amplifier).
(See pages 20~21).
3. After connecting, refer to the pages 34~36.
English - 19
C
onnecting & Setting Up
Case 2 : Connecting to an S-Video
output jack
1. Connect an S-Video cable (not included) between
the S-VIDEO OUT jack on DVD RECORDER and
S-VIDEO INPUT jack on your TV (or AV amplifier).
• You will enjoy high quality images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on DVD RECORDER and
AUDIO IN jacks on TV (or AV amplifier).
COMPONENT
Pr
Pb
Y
green
blue
red
green b
lue
red
■ Make sure that the colour coded
connections match. The Y, P
B
, P
R
component output jacks of your DVD
RECORDER must be connected to the
exact corresponding component input
jacks on your TV.
■ Progressive setting is only available
when the Video Out is set to
Component. (See pages 36~37)
NOTE
02-R119-XEU_16-22_CONNECT 8/18/05 2:37 PM Page 19