Samsung DVD-R119 - Manual (Page 34)

34 - English
S
ystem Setup
2 Press the …† buttons to select Setup, then press
the OK or √ button.
3 Press the …† buttons to select Video, then press
the OK or √ button.
Video setup menu will be displayed.
4 Press the …† buttons to select the desired video
option, then press the OK or √ button.
5 Press the …† buttons to select the desired item,
then press the OK button.
■ Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
NOTE
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Setup
TV Aspect : 4:3 Letter Box √ √
Noise Reduction : Off √ √
Video Output : Component √ √
4:3 Letter Box
4:3 Pan-Scan
16:9 Wide
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Setup
TV Aspect : 4:3 Letter Box √ √
Noise Reduction : Off √ √
Video Output : Component √ √
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Setup
System √ √
Clock Set √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
Install √ √
Dynamic Compression
This is only active when a Dolby Digital signal is
detected.
• On : When Movie soundtracks are played at low
volume or from smaller speakers, the
system can apply appropriate compression
to make low-level content more intelligible
and prevent dramatic passages from
getting too loud.
• Off : You can enjoy the movie with the standard
Dynamic Range.
■ When DTS soundtrack is played, sound
does not output from AV Audio Output.
NOTE
DTS
• Off : Doesn’t output DTS signal. Select this
when your AV receiver or AV amplifier
does not have DTS decoder.
• On : Outputs DTS Bitstream via digital output
when you play DTS track. Select this only
when your AV receiver (or AV amplifier)
have DTS decoder.
Setting up the Video
Display Options
1 With the unit in Stop mode/No Disc mode,
press the MENU button.
This function allows you to setup the TV screen
settings.
No Disc
MOVE SELECT RETURN EXIT
Programme
Setup
Programme
Timer Record √ √
03-R119-XEU_23-39_SETUP 8/19/05 12:40 PM Page 34