Samsung DVD-R119 - Manual (Page 37)

1 With the unit in Stop mode, press the P.SCAN button
on the front of the DVD RECORDER.
The message “Press [Yes] to confirm Interlace
scan mode. Otherwise, press [No].” will appear.
Press the
œ √ buttons to select Yes, and then
press the OK button.
English - 37
S
ystem Setup
■ If the P.SCAN button on the DVD
RECORDER’s front panel is pressed
during playback, the message “This
function is possible only on stop mode”
appears on the screen.
■ Progressive setting is only available when
the DVD RECORDER is in stop mode.
NOTE
Canceling the
Progressive scan
Press [Yes] to confirm Interlace scan mode.
Otherwise, press [No].
Yes No
2 The message “Please, set your TV to Interlace
input. To deactivate, press [STOP] key.” will
appear. Press the OK button.
3 The message “Video Output Mode Interlace Scan”
will appear.
Video Output Mode
Interlace Scan
Please, set your TV to Interlace input.
To deactivate, press [STOP] key.
OK
3 The message “Video Output Mode. Progressive
Scan” will appear.
Video Output Mode.
Progressive Scan
■ Do not press the P.SCAN button if you are
using a TV that does not support Progressive
mode. Nothing will be displayed on the
screen if pressed.
■ If you press the P.SCAN button by mistake
when your TV does not support Progressive
mode, you need to release the Progressive
mode. To release the Progressive mode, press
the P.SCAN button on the front panel 3 times.
The screen will recover after the PS
indicator on the front panel display turns off.
NOTE
03-R119-XEU_23-39_SETUP 8/19/05 12:40 PM Page 37