Samsung DVD-R119 - Manual (Page 70)

70 - English
R
ecording
Recording from external
equipment you are watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1 Press the OPEN/CLOSE button and place a recordable
disc on the disc tray.
2 Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. (See page 67)
3 Press the INPUT button to select the input source
according to the connection you made.
The front panel display changes in the following
sequence:
➞ PR Number ➞ AV1 ➞ AV2 ➞ AV3
4 Press the REC MODE button repeatedly, (or press
the REC MODE button, then press the
…† buttons)
to select the recording speed (quality).
➞ SP ➞ LP ➞ EP ➞ XP
5
Press the REC button.
Information concerning the external input mode is
displayed on the screen, then recording begins.
‘REC’ is displayed on the front panel.
- To pause recording -
• Press the PLAY/PAUSE ( ) button to pause a
recording in progress.
• Press the PLAY/PAUSE ( ) button again during
pause to resume recording.
• You can switch channels by pressing the
PROG ( ) buttons while recording pauses.
- To stop recording -
Press the STOP ( ) button to stop or finish a
recording in progress.
• When using DVD-RW/-R discs, the message
“Updating the information of disc. Please wait for a
moment” is displayed.
Before you start
Record Mode SP 031:39
05-R119-XEU_66-75_REC 8/18/05 2:31 PM Page 70