Sony DSR-2000 - Manual (Page 118)

Chapter 6
Setup Menu
118
Chapter 6 Setup Menu
Extended Menu
Item number Item name Settings
501 STILL TIMER Select the time delay from the tape transport stopping (either the "STOP" mode" or the
still playback mode in search mode) until the unit automatically switches to the tape
protection mode, in order to protect the rotary heads and the tape.
0.5S... 8M ...30M: Set the value in the range 0.5 seconds to 30 minutes.
Menu items in the 500s, relating to tape protection
502 TAPE
PROTECTION
MODE FROM
SEARCH Select the operation of the protection mode to protect the rotary heads and tape when in
the still playback mode in search (jog/shuttle) mode.
STEP : Step forward at 1 /
30
normal speed every 2 seconds.
STDBY: Switch to Standby OFF mode (the unit not on standby).
Item number Item name Settings
Menu items in the 600s, relating to the time code generator
601 VITC POSITION
SEL-1 For DSR-2000
Select a line to insert the VITC in.
12H ... 16H ... 20H: Select any line from 12 to 20.
Note
You can insert the VITC signal in two places. To insert it in two places, set both items
601 and 602.
For DSR-2000P
Select a line to insert the VITC in.
9H ... 19H ... 22H: Select any line from 9 to 22.
Note
You can insert the VITC signal in two places. To insert it in two places, set both items
601 and 602.
602 VITC POSITION
SEL-2 For DSR-2000
Select a line to insert the VITC in.
12H ... 18H ... 20H: Select any line from 12 to 20.
Note
You can insert the VITC signal in two places. To insert it in two places, set both items
601 and 602.
For DSR-2000P
Select a line to insert the VITC in.
9H ... 21H ... 22H: Select any line from 9 to 22.
Note
You can insert the VITC signal in two places. To insert it in two places, set both items
601 and 602.