Sony Ericsson GR64 - Manual (Page 19)

LZT 123 1834 19
2.5 Precautions
The wireless modems are ESD protected up to ±15kV on all 2.8V IO pins. All other
pins are protected up to ±2kV. Integrators must follow electronic device handling
precautions when working with any electronic device system to ensure no damage
occurs to the host or the wireless modem. In the section ‘Integrating the Wireless
modem’, users will find more information about safety and product care. Do not
exceed the environmental and electrical limits as specified in ‘Technical Data’
section.
2.6 Guidelines for Safe and Efficient Use
Users must follow the general usage outlined in this chapter before using the GR64
for any purpose.
2.6.1 General Usage
• Always treat the product with care and keep it in a clean and dust-free place.
• Do not expose the product to liquid.
• Avoid exposing the product to moisture or high humidity environments.
• Do not expose the product to extreme high or low temperatures beyond
those specified for operation and storage.
• Do not expose the product to open flames or lit tobacco products.
• Do not drop, throw or try to bend the product.
• Do not paint the product.
• Do not use the product near medical equipment without requesting
permission.
• Do not use the product when in, or around aircraft, or areas posted “turn off
two-way radio”.
• Do not use the product in an area where a potentially explosive atmosphere
exists.
• Do not place the product or install wireless equipment in the area above a
vehicle’s air bag.
• Do not attempt to disassemble the product; only Sony Ericsson authorized
personnel should perform servicing.