Sony Ericsson GR64 - Manual (Page 55)

LZT 123 1834 55
5.11 Serial Data Interfaces
The serial channels consist of two UARTs and a USB port. These provide
communication links to the application or accessory units.
The serial channels can be used in differing configurations, depending upon the
users requirements and application. However, the common configuration options are
described:
• UART1 has full RS-232 functionality and is used for all on- and off –line
communication (modem sleep & wake functional control is an integral component
of this interface). Its intended use is that of the primary command (AT) interface.
• UART3 behaves as a general-purpose serial data link. It can be used for data
logging and de-bugging purposes. A GPS device can be used with UART3 as part
of an embedded application.
• The USB port provides a convenient general purpose peripheral (slave) port for use
with host devices which have USB controllers.