Configuring tcp/ip for dhcp - windows nt, Configure tcp/ip - windows nt, Configuring tcp/ip: dynamic ip on windows nt – SMC Networks Barricade SMC2404WBR User Manual
Page 36
Advertising
![background image](/manuals/143937/36/background.png)
BACK – Configuring TCP/IP on Windows
NT/2000/XP
NEXT – Configuring Static for Windows NT
Configuring TCP/IP:
Dynamic IP on Windows NT
Step 1: Right-click the Network icon on your desktop and click "Properties".
Figure 1.0
Step 2: Go to the Protocols tab and select the TCP/IP Protocol and then click on
the "Properties" button. Make sure that they are set to obtain an IP address
automatically.
Advertising