SMC Networks Barricade SMC2404WBR - Manual (Page 76)

BACK - Advanced Settings - Main Page NEXT - Advanced Settings - Virtual Server
Advanced Settings - Wireless
This section will allow you to configure your SMC2404WBR for use with WEP (Wired Equivalent
Privacy) security.
Figure 1.0
❍
To configure the Wireless Barricade Turbo as a wireless access point for
wireless clients (either stationary or roaming), all you need to do is define
the radio channel, the Service Set ID (SSID), and encryption options. On the
main page, you can also disable the wireless function altogether.
❍
You need to open up your web browser and go to http://192.168.2.1, log
into the router and go into the Advanced Setup. Click on the "Wireless" link
on the left in order to configure the wireless settings. Please make sure that
the Wireless functions are enabled before proceeding. You should specify a
common radio channel and service domain (i.e., Service Set ID) to be used
by the Wireless Barricade Turbo and all of your wireless clients. Be sure
you configure all of your clients to the same values. By default, the Wireless
Channel is set to "6" and the SSID is "default". The WEP is also disabled.