Sennheiser evolution wireless serie ew500 - Manual (Page 60)

57
Switching the receiver on/off
Ǡ Press the POWER button
¶
to switch the receiver on.
Ǡ To switch the receiver off, press the POWER button until “OFF” appears
on the display. You can then release the button.
After a power failure, the device returns to the previous setting (ON/OFF).
Adjusting the AF output level
Ǡ Use the AF output level control ¹ to adjust the AF signal level that
appears at outputs
µ
and
¸
.
Connecting the headphones
Ǡ Connect the headphones to the headphone output (PHONES)
ᕡ
for monitoring the audio signal.
Ǡ Use the headphone volume control
ᕢ
to adjust the volume.
Attention: First set the volume control to the lowest volume by turning
it counter-clockwise as far as possible!
Volume up? – NO!
When people use headphones, they tend to choose a higher volume
than with loudspeakers. Listening at high volume levels for long
periods can lead to permanent hearing defects. Please protect your
hearing, Sennheiser headphones have an excellent sound quality even
at low volumes.