Sennheiser evolution wireless serie ew500 User Manual
Page 69
66
Battery status indication
The red LED
µ
and the lower 8-segment bargraph on the display provide
information on the (remaining) battery capacity.
Bargraph:
The bargraph indicates the (remaining) battery capacity in 3 steps:
8 segments:
the full battery capacity is available,
4 segments:
the battery capacity is sufficient,
1 segment:
the battery is going flat,
immediately replace the battery.
Note:
When switching on the transmitter with a partially used battery, it is
possible that all eight segments may show for a short period of time –
if this happens, re-check battery status after a few moments.
LED lit up:
The transmitter is switched on and the battery capacity is sufficient.
LED flashing:
The battery is going flat! You should immediately replace the battery!