Sony Reader PRS-950 - Manual (Page 144)

Troubleshooting
144
Table of Contents Index
 When you are out of the network coverage area for a
while, slide the WIRELESS switch to “OFF” (  18 ). Battery
life can be extended by turning off the wireless feature.
 Battery consumption may increase when using the
[Browser] application. When the [Browser] application is
not in use, close it by returning to the [Applications] or
[Home] menu.
The Reader cannot turn on.
 Moisture condensation may have occurred. Wait for a few
hours and then turn on the Reader.
 Battery power has been fully depleted. After charging the
Reader by connecting to the supplied AC adapter and
waiting for about one minute, slide the power switch to
turn on the Reader.
Or after charging the Reader by connecting to your
computer using the supplied USB cable for about 5
minutes, the Reader is turned on automatically (  48 ).
Screen
Display takes a long time to appear.
 In cold temperatures it may take time for the display to
appear. This is due to the display characteristics and not a
malfunction.
 It may take a few moments for the Reader start-up screen
to appear after a reset or shutdown.
The screen is frozen.
 Reset the Reader by pressing the RESET hole. Then, after
5 seconds slide the power switch to turn on the Reader
again (  142 ).