Sharp AJ-2200 - Manual (Page 20)

18
LOADING PAPER
Follow the steps below to load paper into the paper tray or bypass tray.
You can load plain paper and other special paper. For detailed information of paper type,
see page 49.
LOADING PAPER INTO THE PAPER TRAY
1 Remove the output tray , and open the front lid of paper tray .
2 Adjust the guides and shown in the illustration to the width
of the paper.
3 Load the paper.
Load the paper print side down into the paper tray. Make sure to push the paper to
the right side and the rear side of the tray.