Sharp AJ-2200 - Manual (Page 33)

31
SETTI
NG
UP
FO
R
Wi
ndow
s
INSTALLING THE PRINTER DRIVER
Installing onto Windows 2000
1 Make sure that the printer is connected to your computer.
2 Turn on the printer, and then turn on your computer.
On this step, "Found New Hardware Wizard" window will appear.
3 Click the "Cancel" button.
4 Insert the supplied CD-ROM into your CD-ROM drive.
5 Double-click "My Computer" ( ), and then double-click the CD-
ROM ( ) icon.
6 Double-click the "SETUP" ( ) icon.
7 Check if the appropriate language has been selected, and then
click the "OK" button.
Normally, the correct language is selected automatically.
If this window does not appear, ensure to connect the printer and your computer.
If the window does not appear while the printer and your computer is securely
connected by USB cable, refer to "Failed to Install the Printer Driver (Windows
2000)" in "Troubleshooting" of the online manual.
Make sure to click the "Cancel" button. If you continue installation without clicking
the "Cancel" button, you may not install the driver successfully.