Sherwood R-863 - Manual (Page 17)

17
To mute the sound.
11
When 96 kHz PCM(2 channel stereo) signals are
input or the source direct function is selected, the
cinema EQ function can not be selected.
“CINEMA-EQ ON” will scroll on the display.
Press the button again to cancel, then “CINEMA-
EQ OFF” will scroll on the display.
“MUTE” lights up.
To resume the previous sound level, press the
button again.
To compensate for edgy or shrill movie
sound tracks.
10
To listen with the headphones.
12
Ensure that the SPEAKER button is set to off.
When listening to DTS, Dolby Digital or MPEG
program sources, if the headphones are plugged in
and the SPEAKER button is set to off, the 2-CH
downmix mode will be selected automatically. (For
details, refer to “Downmixing into 2 front
channels” on page 24.)
PHONES
To achieve pure sound quality.
9
Only when playing program sources recorded in
analog stereo or digital 2 ch PCM format, the source
direct function can be selected.
“DIRECT” lights up and stereo mode is
automatically selected. Then the sound that bypasses
the tone circuitry will be heard.
Press the button again to cancel the source direct
function.
When you select the 7.1 CH DIRECT as input
source or the digital signals from DTS, Dolby
Digital or MPEG sources, etc. are input, the source
direct function is automatically canceled.
ENGLISH
SOURCE
DIRECT
CINEMA EQ
DVD
VOL. CH LEVEL
OSD CH SEL
DSP MODE
AUTO
ST CENTER MODE TEST TONE DISC P.SCAN
TUNER CD T1/MON AUX PHONO
VID1 VID2 VID3 VID4 VID5
SYS DISP SLEEP DIRECT IN ROOM2
INTRO
RETURN
B RPT A
7.1 SURR TITLE
ENTER
HOME THEATER MASTER RNC-220