Sherwood R-863 - Manual (Page 24)

Downmixing into 2 front channels
To cancel the 2 - CH downmix mode, select the
desired surround mode with using the MULTI
CONTROL knob or the DSP MODE button, etc.
When the playback of the source on the player is
stopped or interrupted, etc, the 2 - CH downmix
mode is not canceled even though “ DTS”,
“DOLBY DIGITAL” or “MPEG” indicator goes
off.
If headphones are plugged in and the SPEAKER
button is set to off while the digital signals from the
DTS, Dolby Digital or MPEG program sources are
being input, it will enter the 2- CH downmix mode
automatically and if headphones are unplugged and
the SPEAKER button is set to on while in the 2 -CH
downmix mode, it will return to the previous mode. Allows the multi - channel signals encoded in DTS,
Dolby Digital or MPEG format to be reproduced
through only two front speakers or through
headphones.
When the digital signals from the DTS, Dolby Digital
or MPEG program sources are input, press the
STEREO button.
“DTS”, “MPEG”or “DOLBY DIGITAL” indicators
lights up and “2CH DOWNMIX” is scrolled,
meaning it enters the 2 - CH downmix mode, and
then the discrete multi-channels(except LFE) are
mixed down into 2 front channels.
ENGLISH
DVD
VOL. CH LEVEL
CH SEL
DSP MODE
AUTO
ST CENTER MODE TEST TONE DISC P.SCAN
TUNER CD T1/MON AUX PHONO
VID1 VID2 VID3 VID4 VID5
SYS DISP SLEEP DIRECT IN ROOM2
INTRO
RETURN
B RPT A
7.1 SURR TITLE
ENTER
HOME THEATER MASTER RNC-220
or
STEREO
ST
24