28 digital audio recording with md recorder – Sherwood R-863 User Manual

Page 28

Advertising
background image

ENGLISH

28

DIGITAL AUDIO RECORDING WITH MD RECORDER

For digital recording, select the desired
digital input as the recording signal input.

2

Select a desired input of CD, TAPE
MONITOR and VIDEO 1~VIDEO 4 as a
recording source.

1

Start recording on the component
connected to OPTICAL DIGITAL OUT.

3

Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD
recorder or CD recorder, you can enjoy high-quality sound of digital recording without converting the original
signals. Refer to “ CONNECTING AUDIO COMPONENTS” and “CONNECTING DIGITAL INs and OUT” on
page 5 and 7 and the operating instructions of the MD recorder or CD recorder.
Notes:
Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.
In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal
format.
There are some restrictions on recording digital signals. When making digital recordings, refer to the operating
instructions of your digital recording equipment to know what restrictions are imposed.

or

INPUT SELECTOR

AUDIO

VIDEO

TAPE MON.

DVD

VOL.

CH LEVEL

CH SEL

DSP

MODE

AUTO

ST

CENTER

MODE

TEST

TONE

DISC

P.SCAN

TUNER

CD

T1/MON

AUX

PHONO

VID1

VID2

VID3

VID4

VID5

SYS DISP

SLEEP

DIRECT IN

ROOM2

INTRO

RETURN

B

RPT

A

7.1 SURR

TITLE

ENTER

HOME THEATER MASTER

RNC-220

CD

T1/MON

VID1

VID2

VID3

VID4

Start play on the desired input.

4

Each time this button is pressed, the corresponding
input is selected as follows:

DIGITAL

ANALOG

Note: When the selected digital input is not

connected, “DIGITAL” is flickering. There
will be no recording as well as no sound.

DIGITAL/ANALOG

Start recording on the component hooked
up to VIDEO 1.

3

Start play on the components hooked up to
VIDEO 2 and the CD respectively.

4

The audio signal from the CD and the video signal
from the VIDEO 2 component will be dubbed and
you can enjoy them on the TV set and from the
speakers.
Note: Be sure to observe the order of the above

steps

and

.

Advertising