Rack mounting the xl-gps – Symmetricom XL-GPS User Manual
Page 33
997-01530-01, Rev. C-25, Jan 2008
23
2
5
1
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Rack Mounting the XL-GPS
The XL-GPS comes with the following parts needed to mount the XL-GPS securely in any EIA standard
19-inch (48.26-cm) rack:
•
2 mounting brackets
•
4 flat-head, Phillips screws
Have the following items ready and available:
•
The appropriate AC or DC power source to connect to the XL-GPS’s power supply.
•
A #2 size Phillips bit screwdriver
To rack mount the XL-GPS:
•
Unscrew the four phillips-head screws from the front end of the side panels.
•
Use the same screws to attach the rack mount brackets, as shown.
•
Tighten the screws using a #2 size Phillips screwdriver.
•
Position the XL-GPS in any EIA Standard 19-inch (48.26 cm) rack system, and line up holes in the
brackets with the holes in the rack.
•
Secure the brackets to the rack using rack mount screws.