F71 - oscillator statistics, F71 – oscillator statistics, For example, enter – Symmetricom XL-GPS User Manual
Page 72: Xl-gps gives one of the following responses, Or, to change the time mode to utc, enter, F69 responds to these changes with, F69<cr, F69<s><tt><cr, F69 local<cr, F69 utc<cr
62
997-01530-01, Rev. C-25, Jan 2008
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
1
For example, enter:
F69<CR>
XL-GPS gives one of the following responses:
F69 GPS <CR><LF>
F69 UTC <CR><LF>
F69 LOCAL <CR><LF>
F69 STANDARD <CR><LF>
To set the time mode, enter a command using the following format:
F69<S><TT><CR>
where:
For example, to change the time mode to local time, enter:
F69 LOCAL<CR>
Or, to change the time mode to UTC, enter:
F69 UTC<CR>
F69 responds to these changes with:
OK<CR><LF>
RESETTING THE UNIT<CR><LF>
PLEASE WAIT...<CR><LF>
F71 – Oscillator Statistics
Use F71 to display the phase, frequency offset, drift rate, and DAC value of an internal or optional
external oscillator.
Definitions:
F
= ASCII character F.
69
= Function
number.
<S>
= ASCII
space
character.
<TT>
= Time Type. Either GPS, UTC, LOCAL, or STANDARD.
<CR>
= carriage return character.
<LF>
= line
feed
character.