F60 - gps receiver satellite list, F60 – gps receiver satellite list, Where: for example, enter – Symmetricom XL-GPS User Manual
Page 66: Example response, F53 responds, F53<cr, F53 time mode (or dynamic mode)<cr><lf, F53<sp><mode><cr, F53 time mode<cr, F53 dynamic mode<cr
56
997-01530-01, Rev. C-25, Jan 2008
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
1
where:
For example, enter:
F53<CR>
Example response:
F53 TIME MODE
(or DYNAMIC MODE)<CR><LF>
To set the GPS Operation Mode, enter a command using the following format:
F53<SP><MODE><CR>
where <MODE> equals “DYNAMIC MODE” or “TIME MODE”.
For example, enter:
F53 TIME MODE<CR>
Or:
F53 DYNAMIC MODE<CR>
F53 responds:
OK<CR><LF>
F60 – GPS Receiver Satellite List
Use function F60 to display the identification number and signal strength of tracked or current satellites.
‘Tracked’ means a satellite’s signal is being received and interpreted by the receiver (or that the XL-GPS
has GPS data that suggests this satellite should be visible to the antenna).
GPS satellite are grouped into the following categories:
•
Tracked: the XL-GPS is receiving the GPS signal, but isn’t using it to calculate time and position.
F
= ASCII character F (f or F for input string).
53
= the function number.
<SP>
= ASCII space character one or more.
<SEP>
= one or more space characters.
<STATUS>
= DYNAMIC MODE or TIME MODE
<CR>
= carriage return character.
<LF>
= line feed character.