Schumacher Automatic Battery Charger / Maintainer SC-200A - Manual (Page 14)

• 14 •
4 Amp, 6 Volt Battery Battery Condition
Ampere Hour Battery
Capacity
Approximate Average Charge Time in
Hours
50% Discharged 100% Discharged
10 1.6 3.2
12 2.0 4.0
20 3.2 6.4
MAiNTENANCE iNSTRUCTiONS 14.
After use and before performing maintenance, unplug and 14.1
disconnect the battery charger (see sections 6, 7 and 8).
Use a dry cloth to wipe all battery corrosion and other dirt or oil 14.2
from the battery clips, cords, and the charger case.
Ensure that all of the charger components are in place and in 14.3
good working condition, for example, the plastic boots on the
battery clips.
Servicing does not require opening the unit, as there are no user- 14.4
serviceable parts.
All other servicing should be performed by qualified service 14.5
personnel.
MOViNG ANd STORAGE iNSTRUCTiONS
15.
Store the charger unplugged, in an upright position. The cord will 15.1
still conduct electricity until it is unplugged from the outlet.
Store inside, in a cool, dry place (unless you’re using an on-board 15.2
Marine Charger).
Do not store the clips on the handle, clipped together, on or 15.3
around metal, or clipped to cables.
If the charger is moved around the shop or transported to another 15.4
location, take care to avoid/prevent damage to the cords, clips and
charger. Failure to do so could result in personal injury or property
damage.