Schumacher Automatic Battery Charger / Maintainer SC-200A - Manual (Page 9)

• 9 •
FEATURES 9.
Amp/Volt Selector Switch 1.
Battery Status LEDs 2.
Battery Clamp Cable Assembly 3.
Ring Terminal Cable Assembly 4.
12V Plug Cable Assembly 5.
1
2
3
4 5
ASSEMBLY iNSTRUCTiONS 10.
Remove all cord wraps and uncoil the cables prior to using the
battery charger.
CONTROL PANEL 11.
LEd indicators
CHECK (red) LEd lit: Indicates that the charger is not properly
connected to the battery.
CHECK (red) LED flashing: Indicates the charger is in abort mode.
CHARGiNG (yellow) LEd lit: Indicates the charger has detected a
battery and is charging it.
CHARGEd (green) LEd lit: Indicates the battery is fully charged and
the charger is in maintain mode .
NOTE: See the Operating Instructions section for a complete
description of the charger modes.