Getting started, Unpacking, Inserting batteries into the remote – Sony DAV-SR3 User Manual

Page 11: Unpacking inserting batteries into the remote

Advertising
background image

Ge
tting Star

te

d

11

GB

Check that you have the following items:

• Speakers (5)

• Subwoofer (1)

• AM loop antenna (aerial) (1)

• FM wire antenna (aerial) (1)

• Speaker cords (3.5m

×

3, 10m

×

2)

• Remote Commander (remote) RM-SP320 (1)

• Size AAA (R03) batteries (2)

• Foot pads (8)

• Operating Instructions

• Speakers - Connection and Installation (card)

(1)

You can control the system using the supplied
remote. Insert two size AAA (R03) batteries by
matching the 3 and # ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor

on the system.

Notes

• Do not leave the remote in an extremely hot or humid

place.

• Do not use a new battery with an old one.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from

the sun or lighting apparatus. Doing so may cause a
malfunction.

• If you do not use the remote for an extended period of

time, remove the batteries to avoid possible damage
from battery leakage and corrosion.

Getting Started

Unpacking

Inserting Batteries into
the Remote

Remove the cover.

Advertising