Sony DAV-SR3 - Manual (Page 79)

Se
tting
s an
d A
d
ju
stme
nts
79 GB
x SP SETUP
a)
This setting appears when you set “SURR SP”
to “SURR Y” in “SP SETUP.”
b)
When you perform the Quick Setup (page 22),
the default settings are changed.
c)
This setting appears when you set the
corresponding speaker to “Y” in “SP SETUP”
(page 79).
x LEVEL
a)
When you perform the Quick Setup (page 22),
the default settings are changed.
b)
This setting appears when you set the
corresponding speaker to “Y” in “SP SETUP”
(page 79).
CENTER SP
(center
speaker) CENTER Y: Select this if you
use a center speaker.
CENTER N: Select this if no
center speaker is used.
SURR SP
(surround
speakers) SURR Y: Select this if you
use surround speakers.
SURR N: Select this if no
surround speaker is used.
SURR B SP
a)
(surround
back
speaker)
SURR B N: Select this if no
surround back speaker is
used.
SURR B Y: Select this if you
use a surround back speaker.
F DIST
(front
distance)
1.6m
b)
Front speaker distance from
the listening position can be
set in 0.2 meter increments
from 1.0 to 7.0 meters.
CEN DIST
c)
(center
distance)
1.6m
b)
Center speaker distance can
be moved up to 1.6 meters
closer to the listening position
from the front speaker
distance, in 0.2 meter
increments.
SURR DIST
c)
(surround
distance)
1.6m
b)
Surround speaker distance
can be moved up to 4.6 meters
closer to the listening position
from the front speaker
distance, in 0.2 meter
increments.
SB DIST
c)
(surround
back
distance)
1.6m
b)
Surround back speaker
distance can be moved up to
4.6 meters closer to the
listening position from the
front speaker distance, in 0.2
meter increments.
SP POS
c)
(surround
speakers
position)
SP BEHIND: Select this if
surround speakers are located
in the back area of the
listening position.
SP SIDE: Select this if
surround speakers are located
in the side area of the listening
position.
TEST TONE
(test tone) T. TONE OFF: The test tone is
not emitted from the speakers.
T. TONE ON: The test tone is
emitted from both left and
right speakers simultaneously
while adjusting balance. When
you select one of the
“LEVEL” items, the test tone
is emitted from each speaker in
sequence.
F BALANCE
(front
balance)
0 Adjusts the balance between
the front left and right
speakers. (You can adjust from
the center 6 steps left (L6) or
right (R6).)
CEN LEVEL
b)
(center level)
0
a)
Adjusts the level of the center
speaker (–6 dB to +6 dB, 1 dB
increments).
SL LEVEL
b)
(surround
left level)
0
a)
Adjusts the left level of the
surround speaker (–6 dB to +6
dB, 1 dB increments).
SR LEVEL
b)
(surround
right level)
0
a)
Adjusts the right level of the
surround speaker (–6 dB to +6
dB, 1 dB increments).
SB LEVEL
b)
(surround
back level)
0
a)
Adjusts the level of the
surround back speaker (–10
dB to +10 dB, 1 dB
increments).
SW LEVEL
(subwoofer
level)
+4
a)
Adjusts the level of the
subwoofer (–6 dB to +6 dB, 1
dB increments).
AUDIO DRC
(dynamic
compression) DRC OFF: No compression of
DYNAMIC range.
DRC ON: Reproduces the
sound track with the kind of
DYNAMIC range that the
recording engineer intended.
continued