Sony DAV-SR3 - Manual (Page 78)

78 GB
Setting the speakers by using
the front panel display on the
system
You can set the speakers by using the AMP
menu that is displayed in the front panel display.
AMP menu list
1
Press AMP MENU.
2
Press X / x repeatedly until the item you
want to set appears in the front panel
display.
x SP SETUP
Sets the speaker size, distance, and place.
x LEVEL
Sets the balance and level of the each
speaker, and turns on/off the test tone.
3
Press ENTER or c .
4
Press X / x to select the desired item,
then press ENTER or c .
To set the item, press X/x, then press
ENTER or AMP MENU.
You can set the following items. The
default settings are underlined.
SP SETUP
CENTER SP
SURR SP
F DIST
CEN DIST
b)
CENTER Y
1.0 m - 7.0 m
SURR Y
LEVEL
TESTTONE
F BALANCE
T.TONE ON
T.TONE OFF
6 steps left or right
CEN LEVEL
b)
–6 dB - +6 dB
SL LEVEL
b)
–6 dB - +6 dB
SR LEVEL
b)
–6 dB - +6 dB
DRC OFF
DRC ON
SURR DIST
b)
AUDIO DRC
SURR N
CENTER N
SB LEVEL
b)
–10 dB - +10 dB
SURR B SP
a) SURR B N
SURR B Y
SB DIST
b)
SP POS
b)
SP SIDE
SP BEHIND
SW LEVEL –6 dB - +6 dB
a)
This setting appears when you set “SURR SP”
to “SURR Y” in “SP SETUP.”
b)
This setting appears when you set the
corresponding speaker to “Y” in “SP SETUP.”
1.0 m - 7.0 m
1.0 m - 7.0 m
1.0 m - 7.0 m
CUSTOMIZE
DIMMER DIM OFF
DIM ON
DUAL MONO MAIN
SUB
MAIN+SUB
SB DEC SB MATRIX
SB AUTO
SB OFF
MAIN/SUB
AMP MENU
C/X/x/c/
ENTER
With cover opened.